Canon Arizona 1300 XT Series
Specifications

Specifications in detail

Arizona 1300 XT

Print Technology

4/6/8-channel piezoelectric inkjet system using VariaDot® imaging technology; with one 636-nozzle, variable droplet printhead per channel.

Ink Configurations

1340 XT: CMYK 1360 XT: CMYK+WW/V 1380 XT: CMYK+WW/V +cm

Resolution

Variable droplet sizes from 6 to 42 picoliters. The ability to vary the drop size to 6 picoliters produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picoliters produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1.440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).

Print speed

Print Modes Arizona 13x0 XT Flatbed RMO
  1340 XT     1360 XT     1380 XT     m2/h     ft2/h     m2/h     ft2/h  
High-Key  o  o  o 52.8 568.3 38.6 415.5
Express  o  o  o 35.3  380.0 25.8 277.7
Production-Fast      o 25.9  278.8 18.8 202.4
Production  o  o  o 21.3  229.3 17.0 183.0
Quality  o  o  o 15.0  161.5 12.0 129.2
Quality-Matte  o  o  o 10.8  116.3 7.9 85.0
Quality-Density  o  o  o  8.2  88.3 6.3 67.8
Quality-Layered (2)    o  o  7.5  80.7 6.0 64.6
Quality-Layered (3)    o  o  5.0  53.8 4.0 43.1
Fine Art  o  o  o 11.9  128.1 9.5 102.3
High Definition  o  o  o  6.4  68.9 6.0 64.6
Varnish (High Gloss)    o  o  ~5  53.8 n.a. n.a.

Ink System

IJC357 UV-curable inks packed in quick-change, 2 liter bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 liter bags.

System Architecture

True flatbed for rigid media printing with available Roll Media Option for flexible media printing.

Geometric Accuracy

  Measured Over Maximum Error
  Flatbed     RMO     Flatbed     RMO  
Line length (system width) 2,500 mm 2,190 mm ± 0.8 mm ± 0.6 mm
Line length (system height) 3,080 mm 2,000 mm ± 1.0 mm ± 1.5 mm
Line straightness (system width) 2,500 mm 2,190 mm 0.7 mm 0.7 mm
Line straightness (system height) 3,080 mm 2,000 mm 0.7 mm 2.0 mm
Diagonal Error (“square-ness”)  3,080x2,500 mm   2,000x2,190 mm  1.0 mm 2.5 mm

Rigid Media

Maximum Area: 308 x 250 cm / 121.3 x 98.4 inches (320 x N cm permitted w/308 cm vacuum)
Maximum Thickness: 50.8 mm / 2.0 inches
Maximum Mass: 34 kg/m2 / 7 lbs/ft2

Rigid Media Print Area

Up to: 309 x 251 cm / 121.7 x 98.8 inches (321 x N cm permitted w/308 cm vacuum)

Media Roll Specification

90 to 220 cm / 35.4 to 86.6 inches. Up to 50 kg / 110 lbs (at any width). Maximum diameter: 240 mm (9.45 inches). Core: 3 inches (inside). Bias: Print-side-in or print-side-out. Most types (application dependent)

Roll Media Print Width

Up to 219 cm / 86.2 inches

Image Processing

ONYX® Thrive™ 18 (421 configuration or greater recommended)

Connectivity

10/100/1000 Base-T

Arizona Xpert

Arizona Xpert offers a unique tool set to save time and money in the creation of complex, multi-layered and duplex applications. The “Arizona Xpert Resale license” and the “Add Arizona Xpert Permission” are included with every Arizona 1300 printer and require ONYX Thrive to be installed.

Electrical Power / Compressed Air

2 x 200-240 VAC, 50/60 Hz, Single-phase, 16A per circuit 

Circuit Breakers: North America: 20A. Europe: 16A. ROW: See CB Scheme Report 

Clean, dry, compressed air using a Coalescing Filter. Pressure Regulator set to 690 kPa (100 psi) and connects air regulator to ½ inch or 12mm OD air tubing. Peak flow: 57 l/min at 690 kPa (2 cfm at 100 psi)

Environment

Temperature: 18˚ to 30˚ C (64˚ to 86˚ F) 

Relative humidity: 30 to 70% (non-condensing) 

Ventilation: 1.200 m3 per hour / 700 cfm minimum (see Site Preparation Guide) 

Altitude: 2.750 m (9.020 feet) maximum, however some components specify a limit of 2.000 m (6.560 feet)

Size/Weight

Printer only: 4.66 m x 3.83 m (183.5” x 150.8”), 1,660 kg (3,660 lbs.) 

Printer + Roll Media Option: 4.66 m x 4.12 m (183.5” x 162.2”), 1,910 kg (4,211 lbs.) 

Table height: 0.88 m (34.6”) / Overall height: 1.3 m (51.2”)